Trench Sheets Accessories

ALL EQUIPMENT IS AVAILABLE FOR PURCHASE

Trench Sheet Accessories

Driving Cap The Standard Trench Sheet Driving Cap is specially manufactured to protect the profile of the Trench Sheet while it is being driven into the ground. It will stop any unnecessary damage being caused to the Trench Sheets. Full range of Driving Caps are available for all Sheet Piles.
Quick Release Shackles We offer 2 different types of Quick Release Shackles For use with Standard/KD4 Trench Sheets (red) For use with Heavy Duty Pile DM500/KD6/Larssen Piles (yellow). A Quick Release Shackle is designed to enable the safe lifting of Sheet Piles in a single operation and, on completion of lifting, can be disconnected from ground level
Trench Sheet Extractor The Trench Sheet Extractor is designed to locate over the end of the Sheet Piles, and is secured by means of a pin inserted through the pre-drilled hole in the top of the pile Available in 5, 7, 9 and 20 tonne SWL

HYDRAULIC MANHOLE FRAME ACCESSORIES

POWERED HYDRAULIC PUMP

BUCKET PUMP

Air/Petrol Powered Installation Pump - double acting
Bucket Pump - double acting
Bucket Pump - single acting
Single Hydraulic Hose (M+F)
Single Hydraulic Hose (F+F)
4 Way Hose set (M+F) - manhole
frames only
We supply Shoring Fluid for use with our
Hydraulic Equipment

ONLY SHORING FLUID TO BE USED IN OUR HYDRAULIC PUMPS

HANGING CHAINS

	Length	Break Weight
Light Duty Hanging Chains	2.0mtr	9000kg
Heavy Duty Hanging Chains	2.5mtr	22000kg
2no Hanging Chains will be supplied per Waler Rail
4no Hanging Chains will be supplied per Manhole Frame (set of 4) WARNING - DANGER TO LIFE All Hanging Chains supplied with Shoring equipment are safety chains, and are NOT to be used for Lifting or Pulling. Failure to comply with this advice could lead to serious injury or death.

	Next Page
www.site-equipment.co.uk